1 sheet (75x110mm) with 20 individually removable stickers

Our textile stickers consist of three layers. The reflective upper 3M Scotchlite layer consists of tiny glass beads, which in turn are processed on a flexible fabric. This in turn is laminated with a PSA adhesive film, which adheres strongly to both textile and hard surfaces.

The degree of retroreflection is very high and is at least 300 cd/lux-m2. This means that the stickers are clearly visible from a long distance.

The product is certified according to the Oeko-Tex 100 standard.

The stickers withstand high temperature fluctuations (-40°C - 90°C) and are weather and solvent resistant.

The thickness is around 0.2mm.

The textile stickers are simply stuck on. Ironing or sewing is not necessary. Thanks to the combination of a special adhesive film and a flexible basic structure, they adhere to both textile and solid surfaces and are therefore a universally applicable solution for better visibility in the dark.

The surface to be glued should be dry and free of grease and dust. Remove the sticker from the backing paper and then press firmly. For good adhesion it is also recommended to apply the stickers at a minimum temperature of 18°C.
The stickers can be easily removed by mechanically peeling off. Re-gluing is then no longer possible due to the reduced adhesive strength. After prolonged use, adhesive residues on the surface cannot be ruled out.

Whether the stickers survive washing machine cycles depends on several factors, in particular the surface material of the clothing and the washing program. Coated (functional) materials (e.g. water-repellent outerwear) prevent the fabric and adhesive from bonding optimally, which means that the stickers can fall off. Strong spinning and high heat in the dryer will also negatively affect the adhesion of the stickers.

Although a large number of washing tests with a wide variety of clothing items have shown positive results and little damage, machine washing of textiles with stickers is therefore not recommended in order to avoid possible disappointment and frustration.

In contrast to our regular stickers for smooth surfaces, the raw material for our textile stickers does not come from Brandenburg, but from the other side of the Atlantic. Unfortunately, there is (still) no supplier of this special material in Europe. This is also the main reason why our textile stickers are a bit more expensive in comparison.

The further processing, however, takes place as usual in Berlin, with us, our partner institutions and inclusive workshops.