Reflective foil set BBX: Lightspeed

From €39,00
Tax included Shipping calculated at checkout.

7 reviews

Visible from the side

The BBX side parts of your Bullitts beg to be covered with stickers. With our two designs "Coffee Racer" and "Lightspeed" you have given your cargo bike a sporty design in no time at all. Whether you want to set a contrast in color or prefer to remain subtle is up to you.

For each side you get a prefabricated, custom-fit sheet, which is also very easy to apply with the help of the transfer film. In the video below you can see how simple it really is.
Thanks to the customer photos you sent in, it can be seen that frame segments and transport boxes have already been given the reflective design, which doesn't look any less cool. So you are not as limited in the application as the product title suggests.

So, choose a color and make your draft horse visible! 


2 sheets (= a mirrored pair) in the format of 70x10xm each


The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.


Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.


After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.


The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

Customer Reviews

Based on 7 reviews
Passt auch richtig gut an ein Load!

Wie ich finde…

Top! Einfach Top!!!

Ich hatte echt schiss, dass sich hier nur die Hochbegabten melden und ich die wertvollen Aufkleber gleich mal voll in den Sand setze….ABER die Trägerfolie ist wirklich so beschaffen, dass man mit ein bisschen Gefühl einfach Erfolg haben muss! Dass es mega geil aus sieht ist in diesem Shop eh schon selbstverständlich aber seht selbst;-)

Rouven Steffe
Sieht gut aus, klebt gut, Sichtbarkeit super!

Habe die Sticker auf die Kiste meines Longjohns geklebt. Sieht gut aus, klebt gut und die Sichtbarkeit bei Nacht ist super. Klare Kaufempfehlung.


Alles super.


Habe die Aufkleber für die BBX Seitenteile meines Bullitts bei den Jung*innen aus Berlin bestellt.
Die Qualität ist überragend!
Das Anbringen der Aufkleber ist einfach, wenn man sich die ca. 10 Minuten Zeit dafür nimmt.