Reflective foil set BBX: Coffee Racer


Reflective foil set BBX: Coffee Racer - Black is backordered and will ship as soon as it is back in stock.

Produktbeschreibung

Sichtbar von der Seite

Die BBX Seitenteile eures Bullitts laden geradezu dazu ein, beklebt zu werden. Mit unseren beiden Designs "Coffee Racer" und "Lightspeed" habt ihr eurem Lastenrad im Handumdrehen ein sportliches Design verpasst. Ob ihr dabei farblich einen Kontrast setzen oder lieber dezent bleiben wollt, bleibt euch überlassen.

Pro Seite bekommt ihr einen vorgefertigten passgenauen Bogen, der mit Hilfe der Transferfolie auch ganz einfach aufzubringen ist. Weiter unten im Video seht ihr, wie simpel es tatsächlich ist.
Dank der von euch eingesendeten Kundenbilder ist erkennbar, dass auch schon Rahmensegmente und Transportkisten das reflektierende Design abbekommen haben, was nicht weniger cool aussieht. Ihr seid hier also gar nicht so beschränkt in der Anwendung wie es der Produkttitel vermuten lässt.

Also, wählt eine Farbe und macht euer Zugpferd sichtbar!

Contents

2 sheets (= a mirrored pair for left and right) in the format of 70x10cm each

Material

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.

Application

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free from grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

Care

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

Production

The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

Customer Pictures

Apply - BBX

Play

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Matthias
Very chic 😍

The decals are super easy to apply and look really good. Small bubbles can be easily wiped out with a cloth thanks to the carrier film. I am fully satisfied and will definitely not be the last 😅

S
SD
Great on the frame too!

Inspired by the other review here, I also stuck the stickers on the frame and think it's great. Doesn't stand out directly in white, but reflects 1A.

Thank you! That looks great. We are so happy that the BLLTT set is so well received.

M
Marco Schomakers
great quality

The workmanship is great, the attachment was very easy. Thanks to the transfer foil, I was able to work well even in difficult, uneven areas and the inheritance turned out great (in my opinion :-) )

S
Sacha Frank
Coffee Racer from Krefeld

Hello, everyone,
I decorated my Bullitt with the coffee racer. I adapted the set to the frame using a scapel, since it is actually intended for the side parts of the box. The adhesive story is quickly told, the protective film removed from the adhesive side, the pattern aligned along a pencil line and pressed on. Then iron everything bubble-free with a squeegee and remove the transfer film. A soft cloth brought everything to a high gloss and the paint was finished. I am very satisfied with the final product and the luminosity of the black stickers see photo
Greetings from Krefeld SACHA

Wow! Very cool result ❤️ Thanks for sharing, the Hall of Fame will be happy!