Reflective Shapes - Universal


The all-rounder

The narrow reflective strips can be used very universally, hence the name. They are suitable e.g. great for the rear struts and fork on the bicycle frame, for sporty helmets with air vents, as well as for stroller frames, wheelchairs and walkers. The simple shape can be integrated particularly unobtrusively into existing designs. Undisputed bestseller!


1 sticker sheet á 105x115mm with 18 reflective stickers


The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.


Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.


After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.


The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

customer pictures



Customer Reviews

Based on 93 reviews

Für Fahrrad und Helm super geeignet

Reflective Stickers schwarz

Ich habe die Sticker auf meinem Reithelm angebracht, um an der Straße besser sichtbar zu sein.
Die Anbringung nach Anleitung ist einfach und der Effekt super!
Ich bin mit dem Artikel sehr zufrieden und kann ihn uneingeschränkt weiterempfehlen.

Lichtblick in den Tiroler Nächten

Mit meinem Helm (Refletive Stickers Rainbow) und meinem Mantel (Reflective Stickies für Textil - Isometric silber) bin ich jetzt beim Radeln in der Nacht unübersehbar - und sieht auch noch toll aus! Dank eurer guten Hinweise war auch das Anbringen kein Problem - vielen Dank! Nur die Speichen-Sticker müssen warten, bis es wärmer ist ...

Jörg Hackmann

Hab mir die Aufkleber in meiner Lieblingsfarbe Schwarz gekauft und kann nicht fassen wie gut die das Licht reflektieren und mich im dunkeln sichtbar machen... Klare Kauf Empfehlung...

Mein Wunsch

wäre, wenn es gespiegelte Versionen, eurer Sticker gäbe.
Besonders für escooter, es ist nicht so einfach einen Verlauf den man auf einer Seite, am Stück angebracht hat, symmetrisch auf die andere Seite, zu übertragen.
Es muss, jedes einzel im richtigen Winkel/Höhe/Abstand, appliziert werden.