Reflective Shapes - Cubes

Tax included. Shipping calculated at checkout.

We dance in the hexagon 

We've had a pattern like this in the drawer for a long time. The breaking of the hexagonal structures into interesting sub-objects enables interesting designs. Due to the great color contrasts within the shapes, an enormous number of individual patterns can be created, which can be scaled as desired in all directions. As a result, sticking on apparently complicated geometries is suddenly no longer a big problem. 
For lovers of playful geometric designs, the cubes are definitely an exciting solution.


1 sticker sheet á 105x115mm with 35 reflective stickers


The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.


Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.


After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.


The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

customer pictures

Customer Reviews

Based on 20 reviews
Beste Sticker ever

Jedes Fahrrad sollte obligatorisch Sticker von Euch beim Kauf dazu bekommen. Es macht höllisch Spaß zu kleben und zu gestalten - und ich werde gesehen in der Dunkelheit!!! Sogar in London von den großen Bussen. Yeah!!!

Sehr schick!

Würde ich immer wieder machen!

Mario der Gute
sehr schöne Sticker

wir haben jetzt das zweite Mal bestellt, beim ersten Mal waren die Formen länger und man konnte mehr Sticker in einer schönen Form setzten. Jetzt, da hatte ich beim bestellen nicht aufgepasst, waren es eher kleine und einzelne Sticker die man nutzen kann. Das ist wohl auch dem geschuldet das ich keine weiteren „grauen“ Sticker finden konnte. Trotzdem bin ich mit dem Ergebnis zufrieden.

Miriam Knorr
Einfach Perfekt!

10 von 10 bin total zufrieden, danke ❤️

Tolles Design

Ich habe meinen Helm mit diesen Stickern verziert, es gefällt sogar meinen Kindern.