Reflective Shapes - Chevrons

€9,90
Tax included Shipping calculated at checkout.

45 reviews
Description

For a sporty vintage look 

Inspired by classic frame designs from European road bike brands, these simple shapes are great stickers for contours and subtle details. As individually glued arrows or grouped thanks to application film, they blend in unobtrusively into existing designs. 
The narrower stickers are well suited to the fork or rear end of the bike and can always be used symmetrically.

 
Inhalt

1 sticker sheet á 105x115mm with 20 reflective stickers.

Material

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.

Anwendung

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

Pflege

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

Produktion

The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

Customer Reviews

Based on 45 reviews
96%
(43)
4%
(2)
0%
(0)
0%
(0)
0%
(0)
F
Friederike Wermuth
Tolles Design

Tolles Design, es macht Spaß dem Bike ein neues Aussehen zu geben. Durch Farbabstufungen im Design passt es auch noch zur Farbe des Fahrrads.

B
Britta H.
Originell

Diese Aufkleber machen richtig Freude!

C
Cora
Absolut top

Man kann viel aus den verschiedenen Formen machen, für Helm und Fahrrad, sieht super aus

S
Stephan Müller
Tip-Too

Die Stickers sind hochwertig und sehen gut aus

M
M.L.
Top Aufkleber! Anleitung lesen ist wichtig!

Also erstmal eins vorneweg: Ich bin von der Qualität der Aufkleber wahnsinnig begeistert! Sowohl die stärker der Reflexion als auch die Qualität der Aufkleber ist top.

Weshalb man die Anleitung lesen sollte: Natürlich hab ich die Anleitung zuerst nur überflogen, getreu dem Motto: Ich werde ja ein paar Aufkleber anbringen könnten. Tja, hätte ich mal früher rein geschaut. Ich hab versucht die ersten Aufkleber bei 5 Grad in der Garage anzubringen, aber sie wollten trotz entfetteter Oberfläche nicht halten. Darauf hab ich mir doch noch die Anleitung angeschaut. Und siehe da, es wir ein Aufkleben bei +/- 20 Grad empfohlen. Also drinnen nochmal Versucht und (wer hätte es gedacht) alles klappt wunderbar. Also nochmal der Tipp an alle. Wie es schon auf dem Umschlag steht. Bitte die Anleitung lesen!