Camouflage and Deception

From zebra to military look, everything is here.

Even more creative freedom

Our new DIY sticker sheets offer maximum design options for your individual project. Using the included template and the transparent application film, you can cut out stickers in your desired size, create geometric patterns, form individual shapes or create lettering. And these are just a few examples of what you can do.

In our tutorial we show you a variety of inspiring tips and tricks on how you can use the included materials to create great personal designs. Use it as a boost for your own brilliant ideas!

Tips & Tricks

Thanks to your feedback, we came across the following cool application examples:

• Cover the logo : Cut a suitable piece from the sheet to cover the logo on your bike frame and give the bike a more subtle look
• Desired shapes : Use a template you like and draw your own shapes on the application foil, which you can then cut out and attach
• Pattern : Cut out a variety of similar shapes in different sizes by either playing with the given design or deliberately breaking it
• Complete foiling : Take several sheets, place them next to each other and foil larger continuous areas

What other approaches do you have in mind? Show us your results, share them with the community and become part of the Hall of Fame!

additional sheets

For a relatively small additional charge, you can increase the number of reflective sheets. We want to give you the opportunity for greater design freedom and more reflective fun without incurring huge additional costs. That way, it won't be so bad if you stick something together or cut something up.

Reflective foil in DIN A4 format including tools and instructions

The stickers are made of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective film meets the requirements of EN12899-1 and is characterized by its durability and absolute weather, corrosion and solvent resistance. Temperatures from -50° to +80° Celsius do not affect the material.

The retro-reflection is created by tiny glass balls that are applied to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, meaning they will not fade due to sunlight or lose color due to weather or everyday wear and tear.

The thickness of the stickers is around 0.1mm.

The stickers are suitable for smooth, solid surfaces.
Textiles or rigid foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be removed from the carrier material and stuck on either together or individually as desired.
The surface must be dry and free of grease and dirt particles.
The outside temperature during gluing must not fall below 10° Celsius and ideally corresponds approximately to room temperature.
After 1-2 days, the adhesive bonds with the surface until maximum adhesion is achieved. Removing the stickers after this turns out to be a bit of a fiddle. Mechanical action is better than chemicals when removing them.

Once the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If the film gets dirty, you can wipe it off with water or standard cleaning products without any worries.

The production site for the raw material is in Brandenburg, further processing takes place in Berlin, among other things with the help of workshops for people with disabilities, and we take care of shipping ourselves from our headquarters in Prenzlauer Berg. This means that we can map our value chain entirely regionally. It is within a radius of 35 km from our store.