Reflective sticker - octopus
–
Change
Product details
Scope of delivery and application
Material and care
production
6 Design Tips
In a short video, we'll show you 6 simple tips for a cool sticker design.
2 reflective stickers in the format of 50x50mm and 18x23mm (WxH).
Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free from grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.
The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.
The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.
The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.
The thickness of the stickers is around 0.1mm.
After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.
The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.
The stickers weren't for me at all, but the eyes of a very happy 8-year-old who had lovingly arranged all the stickers on the table in front of her spoke volumes. And they were my attempt to make up for a first mistake where I just got her a Reflective Owl which she didn't put on because she didn't want to waste it. I was told that she always lit up the owl in the dark children's room because she thought it was so great. I hope this time there were enough stickers that one finally gets on the bike.
Rumor Yvonne! Outstanding story. That's what I call real appreciation from the niece. Are you sure you have enough stickers now? You can never have enough... =)
...or as my father wrote: Oktahüüüübsch
Discover application images, tutorials & templates. Get fresh inspiration on our ideas platform. From the community, for the community.
In a short video, we'll show you 6 simple tips for a cool sticker design.
REFLECTIVE Innovations Berlin Gmbh
Senefelderstr. 8 - 10437 Berlin
contact@reflective.berlin
Office: 030 36504328
All of our attention is limited. That's why we reduce our mailings to the bare essentials: milestones, new products, events, special deals.
5.0 / 5.0
6 reviews5.0 / 5.0
8 reviews5.0 / 5.0
1 review