Reflexsticker KID Set: Space

€9,90
Description

Houston, please come!

Mars? That's all well and good, but we want more! Explore the universe and let yourself be shot to Saturn! Take rovers with you, visit the ISS and come back safe and sound on the space shuttle. Asteroids cannot harm you. In between, why not send a satellite to Earth so that we know you're doing well. Off to space, off to new adventures! 13 reflective stickers for your exploration of endless spaces.

contents

1 sticker sheet á 105x115mm with 13 stickers

Material

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.

use

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free from grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

care

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

production

The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

customer pictures

APPLY - KID

Play

Customer Reviews

Based on 6 reviews
67%
(4)
33%
(2)
0%
(0)
0%
(0)
0%
(0)
M
M. N.
Leider geknickt

Beim Hineinschieben in die Pappverpackung wurde die Folie wohl geknickt, daher ist der rechte obere Aufkleber leider unbrauchbar (weil Pappe dranklebt). Schade! Sonst kann ich nicht viel dazu sagen - habe die Aufkleber verschenkt. Gebe aber mal optimistische 4 Punkte. :-)

S
Sandra Rink
Schöne Sticker, die gut halten

Die Sticker sind weder zu dick noch zu dünn. Sehr schön. Leicht anzubringen.

J
Jill
Richtig cool für unser Space-Mobil

Haben die Aufkleber an unserem Lastenrad angebracht und sind begeistert. Sehen richtig chic aus und waren super einfach anzubringen.

F
F.H.

Funktionieren gut und waren der Hit als „Mitgebsel“ auf der Weltallgeburtstsgsparty unserer Kleinen.

S
S.P.
Sehr coole Aufkleber

Die Aufkleber machen einen hochwertigen Eindruck. Sie sind durch die Schutzfolie sehr gut anzubringen. Die Reflexion funktioniert sogar bei Tageslicht!