Reflective foil set BBX: Lightspeed

Sichtbar von der Seite

Die BBX Seitenteile eures Bullitts laden geradezu dazu ein, beklebt zu werden. Mit unseren beiden Designs "Coffee Racer" und "Lightspeed" habt ihr eurem Lastenrad im Handumdrehen ein sportliches Design verpasst. Ob ihr dabei farblich einen Kontrast setzen oder lieber dezent bleiben wollt, bleibt euch überlassen.

Pro Seite bekommt ihr einen vorgefertigten passgenauen Bogen, der mit Hilfe der Transferfolie auch ganz einfach aufzubringen ist. Weiter unten im Video seht ihr, wie simpel es tatsächlich ist.
Dank der von euch eingesendeten Kundenbilder ist erkennbar, dass auch schon Rahmensegmente und Transportkisten das reflektierende Design abbekommen haben, was nicht weniger cool aussieht. Ihr seid hier also gar nicht so beschränkt in der Anwendung wie es der Produkttitel vermuten lässt.

Also, wählt eine Farbe und macht euer Zugpferd sichtbar!

2 sheets (= a mirrored pair) in the format of 70x10xm each

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.