Reflective basic frame set: Stripes

The generalist among the sticker kits

Our "STRIPES" are not one of the absolute bestsellers for nothing. The universal set of 30 reflective strips with a total length of over 10m is ideal for bicycle frames, prams and other frames of any shape and geometry (e.g. wheelchairs or transport boxes).

Individually adaptable lengths and different widths (4mm, 9mm and 16mm) of the strips enable optimal adaptation to the conditions of the respective object. With the help of the application film, which recently covers the stickers, straight and parallel lines are no longer a problem.

Upcycling Tips

The design possibilities are greater than it appears at first glance. We prove that in our tutorials, which give you additional ideas and suggestions to get creative.

Any stickers left? Then use the remaining pieces for your helmet or the rims and voilá, you have created a unique complete work from a simple construction kit. 

And the packaging doesn't necessarily have to go either. As a little surprise, each banderole has a beautiful print on the inside. So if you simply turn the paper over and stick it on, you have made a high-quality box for your pens or for storing small parts in no time at all.

30 reflective strips (10 pieces with a width of 17mm + 10 pieces with a width of 10mm + 10 pieces with a width of 5mm), the longest up to 50cm long. 54 additional end pieces for neatly ending shortened strips.

The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
The substrate must be dry and free of grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.