Reflective sticker - monkey
Product details
Scope of delivery and application
Material and care
production
6 Design Tips
In a short video, we'll show you 6 simple tips for a cool sticker design.
4.81 / 5.0
16 reviews1 reflective sticker in the format 40x58mm (WxH)
Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free from grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.
The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.
The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.
The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.
The thickness of the stickers is around 0.1mm.
After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.
The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.
Habe den Affen als Kennzeichen auf meine Räder angebracht- finde ich sehr gut, ach wie die Affen aussehen und reflektieren.
Leider habe ich in der Beschreibung nicht gesehen das es nicht für Kleidungsstücke gedacht ist- schade! Brauche es eigentlich für die Jacken meiner Kinder. Vielleicht könnte das auf der Website noch offensichtlicher stehen.
Danke für Dein Feedback und schade, dass es für Deinen Anwendungsbereich nicht gepasst hat. In den Produktdetails unter „Lieferumfang und Anwendung“, die Du unter jedem Produkt online findest, steht, dass unsere Aufkleber nur für glatte, feste Oberflächen verwendet werden können. Schau aber gern bei unseren Textilstickern vorbei - die sind speziell für Textilien gemacht und halten Wäschen bei 30 Grad aus. Deinen Hinweis nehmen wir dankend auf! Liebe Grüße, Dein REFLECTIVE Team
Ich liebe den Sticker und reflektiere damit an all meinen Sporträdern. Sie halten viele Wäschen und strotzen jedem Wetter. Immer wieder ein echtes Highlight 👍🏼
Schaut gut aus und qualitativ hochwertig. Hatte es schon bei meinem vorherigen Bike und jetzt wieder.
Discover application images, tutorials & templates. Get fresh inspiration on our ideas platform. From the community, for the community.
In a short video, we'll show you 6 simple tips for a cool sticker design.
REFLECTIVE Innovations Berlin Gmbh
Senefelderstr. 8 - 10437 Berlin
contact@reflective.berlin
Office: 030 36504328
All of our attention is limited. That's why we reduce our mailings to the bare essentials: milestones, new products, events, special deals.