The perfect repair kit

"It would be great if you had a sheet from which we could cut out the appropriate stickers ourselves." OK, all right, here we go.

Whether you want to cover a logo, patch a hole, or conceal an unsightly spot, you have the right kit here. Simply cut the sticker sheet to size and press the appropriate piece firmly onto the clothing or fabric. Done. For particularly creative people who would rather cut out their own shapes, our DIY sheets are also great.

We offer you 5 different colors, with which you can either stay close to the original color, or you can set a visual accent. You can't really go wrong with the dark gray bow, because the color blends in discreetly with every piece, and all single-colored bows also have very high reflectivity, so you don't have to make any compromises in terms of visibility.

We are excited to see how you use the DIY textile stickers. Send us your pictures and share them with our community!

1 sheet (80x140mm)

Our textile stickers consist of three layers. The reflective upper 3M Scotchlite layer consists of tiny glass beads, which are in turn processed onto a flexible fabric. This in turn is laminated with a PSA adhesive film, which adheres strongly to both textile and hard surfaces.

The degree of retroreflection is at least 300 cd/lux-m2, depending on the color. This means that the stickers are clearly visible from a long distance. The rainbow-reflective version is not quite as bright as the single-colored versions.

The reflective material is certified according to Oeko-Tex 100 standard.

The stickers withstand high temperature fluctuations (-40°C - 90°C) and are weather and solvent resistant.

The thickness is about 0.2mm.

The folding packaging is made of recycled paper.

The textile stickers are simply glued on. Ironing or sewing on is not necessary. Thanks to the combination of special adhesive film and flexible base structure, they stick to both textile and solid surfaces and are therefore a universally applicable solution for better visibility in the dark.

The surface to be stuck on should be dry and free of grease and dust. Remove the sticker from the backing paper and then press firmly. For good adhesive strength, it is also recommended that the stickers be applied at a temperature of at least 18°C.
The stickers can be easily removed by mechanically peeling them off. Re-sticking is then no longer possible due to the reduced adhesive strength. After prolonged use, adhesive residue on the surface cannot be ruled out.

A large number of washing tests with a wide variety of clothing items and types of fabric have produced consistently positive results and good adhesion even after several washes (at 40 °C).
How often the stickers survive washing machine cycles depends on several factors, in particular the surface material of the clothing and the washing program. Coated (functional) materials (eg water-repellent outerwear) prevent an optimal bond between the fabric and the adhesive, which can cause the stickers to fall off. Strong spinning and high heat in the dryer will also have a negative effect on the adhesion of the stickers.

The stickers are manufactured in Germany and further processed (screened and packaged) in our trusted socially inclusive partner workshops in Berlin.