Reflective sticker - skull
Product details
Scope of delivery and application
Material and care
production
6 Design Tips
In a short video, we'll show you 6 simple tips for a cool sticker design.
1 reflective sticker in the format 42x58mm (WxH)
Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free from grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.
The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.
The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.
The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.
The thickness of the stickers is around 0.1mm.
After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.
The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.
Der Sticker ist Mega gut. Und hat eine sehr gute Qualität. Er klebt jetzt vorne am Fahrrad von meinem Sohn und mein Sohn liebt sein Fahrrad deshalb noch ungefähr 1000 mal mehr. Seitdem ich den Sticker bestellt habe, muss ich über das Geschäftskonzept von einer Firma nachdenken die Sticker verkauft. Warum? Weil Sticker bei den meisten Anbietern von zum Beispiel Skateboards, Gitarren oder anderen Produkten eher eine Beilage sind. Hier sind Sie das Hauptprodukt. Ich habe mich gefragt, ob es da nicht ab und zu ein Skateboard, eine Gitarre oder eine Packung Cornflakes als Zugabe geben könnte oder müsste. Ich fänd‘s ziemlich witzig. Hi, mein Name ist Marian und ich weiß nicht wie Geld funktioniert. (Aber die Sticker sind echt gut, Versand und Mails auch.)
... fand das Kind und hat verlangt diesen für sein Rad zu bekommen :D
Finde ein klein wenig größer dürfte er sein aber ansonsten ziemlich cool
Bin begeistert tolle Reflexion und auf schwarzem Bike schwarzer Totenkopf man meint den sieht's du nicht aber sobald Licht an leuchtet perfekt.... jederzeit gerne wieder
Super Qualität
Die Blitze sind einfach klasse
Discover application images, tutorials & templates. Get fresh inspiration on our ideas platform. From the community, for the community.
In a short video, we'll show you 6 simple tips for a cool sticker design.
REFLECTIVE Innovations Berlin Gmbh
Senefelderstr. 8 - 10437 Berlin
contact@reflective.berlin
Office: 030 36504328
All of our attention is limited. That's why we reduce our mailings to the bare essentials: milestones, new products, events, special deals.
5.0 / 5.0
2 reviews5.0 / 5.0
8 reviews5.0 / 5.0
1 review