Reflective sticker - owl
Product details
Scope of delivery and application
Material and care
production
6 Design Tips
In a short video, we'll show you 6 simple tips for a cool sticker design.
4.73 / 5.0
15 reviews1 reflective sticker in the format 45x58m (WxH)
Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free from grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.
The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.
The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.
The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.
The thickness of the stickers is around 0.1mm.
After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.
The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.
Reflexsticker - Eule
Sticker ließen sich teilweise nur mit kribbeln lösen und anbringen und hielten anschließend gar nicht. Weiß nicht ob der kleber zu alt war oder was das Problem war. Mal sehen ob sie den ersten Regen überstehen, aber da sie sich teilweise jetzt schon an den Ecken lösen bin ich sehr skeptisch.
Hallo Martin,
Danke Dir für Dein Feedback und schade, dass das Anbringen bei Dir so schwierig war. Unsere Sticker bestehen aus drei Schichten: unten die Trägerfolie, dann der eigentliche Sticker, oben die Applikationsfolie. Normalerweise lässt sich der Sticker leicht von der Trägerfolie ablösen, die Applikationsfolie hilft Dir dann beim präzisen Aufbringen.
Unsere Sticker sind für glatte, feste Oberflächen gedacht, die vor dem Bekleben gründlich gereinigt, entfettet und entstaubt werden sollten. Wenn der Untergrund zum Beispiel rau nicht fest ist, kann das die Haftung beeinträchtigen. Magst Du uns verraten, worauf Du die Sticker angebracht hast?
Dass sich die Sticker jetzt schon an den Ecken lösen, tut uns wirklich leid. Das entspricht nicht unserem Anspruch. Schreib uns gern direkt und schick uns ein paar Bilder dazu, damit wir den Zustand besser einschätzen können. Wir finden sicher eine gute Lösung.
Ich freue mich von Dir zu hören.
Oliver von REFLECTIVE Berlin
Reflexsticker - Eule
Die Sticker sind wesentlich besser als erwartet. Habe damit mein Gravelbike tapeziert samt Laufräder - geil. Ein paar Fitzel sind dann noch für den Helm übrig geblieben. Die Leuchtkraft ist wirklich stark. Danke, ich komme wieder, habe noch weitere Räder in der Garage....
Discover application images, tutorials & templates. Get fresh inspiration on our ideas platform. From the community, for the community.
In a short video, we'll show you 6 simple tips for a cool sticker design.
REFLECTIVE Innovations Berlin Gmbh
Senefelderstr. 8 - 10437 Berlin
contact@reflective.berlin
Office: 030 36504328
All of our attention is limited. That's why we reduce our mailings to the bare essentials: milestones, new products, events, special deals.