Reflective rim stickers: Smudge

Wie mit dem Pinsel gemalt - Smudge verleiht Deinen Felgen einen künstlerischen Touch. Reflektierend, farbenstark und einfach anzubringen.

Regular price €14,90
Tax included Shipping calculated at checkout.

6 reviews

Color: Fire
Gratis Versand ab 45 € - wird automatisch angerechnet

Immer vorwärts

Mit diesen stark reflektierenden Felgenaufklebern in dezentem Design verleihst Du Deinen Rädern beeindruckende Lichteffekte. Die leicht gebogenen Sticker sind bereits optimal für 28-Zoll-Felgen vorgeformt und lassen sich mühelos anbringen. Ein Set enthält zwei Bögen - genug, um beide Felgen vollständig auszustatten. Wenn Du unsicher bei der Breite bist: Die 20 mm Variante passt auf die meisten gängigen Felgen. Die breiteren Versionen (40 mm & 60 mm) eignen sich vor allem für spezielle Felgenarten, etwa Hochprofilfelgen am Rennrad, und sind für Stadtbikes meist zu breit.

Wichtig für die Montage: Bei Felgenbremsen darf die Bremsflanke nicht beklebt werden! Jedes Set umfasst 2 Bögen mit unterschiedlich vielen Stickern – je nach Variante:

20 mm = 10 Sticker (5 pro Seite), 40 mm = 6 Sticker (3 pro Seite), 60 mm = 4 Sticker (2 pro Seite). Ein Beispiel: Beim 20 mm-Set kannst Du vorn 6 Sticker (3 links + 3 rechts) und hinten 4 Sticker (2 links + 2 rechts) platzieren. Hinweis: Die Aufkleber besitzen keine Zulassung gemäß § 67 StVZO.

Produktdetails

Lieferumfang und Anwendung

2 sheets with 4-10 rim stickers, depending on the variant: 20mm: 10 rim stickers
40mm: 6 rim stickers
60mm: 4 rim stickers

Area of application for the stickers are smooth solid surfaces.
Textiles or hard foam (Urban Arrow) are not suitable as a substrate.
With the help of a transparent application film, the stickers can be detached from the carrier material and stuck either together or individually as you wish.
The substrate must be dry and free from grease and dirt particles.
The outside temperature when gluing must not fall below 10° Celsius and ideally corresponds to room temperature.
After 1-2 days, the adhesive connects to the substrate until maximum adhesion is reached. Removing the stickers turns out to be a clever fiddling around. When removing, mechanical action helps better than chemicals.

Material und Pflege

The stickers consist of a reflective film from the traffic safety sector, which is used for warning markings, traffic signs and information signs outdoors. The reflective foil meets the requirements of EN12899-1 and is characterized by its durability and absolute resistance to weathering, corrosion and solvents. Temperatures from -50° to +80° Celsius do not affect the material.

The retro reflection is created by tiny glass spheres that are attached to a transparent plastic layer and reflect the light back to the source. The surface is made of alkyd resin, the adhesive is made of solvent polyacrylate. The full reflection properties are guaranteed for at least 7 years.

The printed colors are UV-resistant and scratch-resistant, i.e. no fading due to sunlight or color loss due to weather or everyday stress.

The thickness of the stickers is around 0.1mm.

After the stickers have been properly applied, you can sit back and relax. Bad weather doesn't bother them. If it gets dirty, you can wipe the film off with water or commercially available cleaners without hesitation.

Produktion

The production site for the raw material is in Brandenburg, further processing takes place in Berlin, including with the help of workshops for people with disabilities, and we take care of the shipping ourselves from our headquarters in Prenzlauer Berg. We can thus map our value chain completely regionally. It is within a 35km radius of our store.

Creative Space

Entdecke Anwendungsbilder, Tutorials & Vorlagen. Hol Dir frische Inspiration auf unserer Ideenplattform. Von der Community für die Community.

6 Design Tips

In einem kurzen Video zeigen wir Dir 6 einfache Tipps für ein cooles Sticker-Design.